Kit All Steel

FIX IT STICKS Maintenance Compact All-in-One Torque Driver Kit, FISMUTK

FIX IT STICKS Maintenance Compact All-in-One Torque Driver Kit, FISMUTK
FIX IT STICKS Maintenance Compact All-in-One Torque Driver Kit, FISMUTK
FIX IT STICKS Maintenance Compact All-in-One Torque Driver Kit, FISMUTK
FIX IT STICKS Maintenance Compact All-in-One Torque Driver Kit, FISMUTK
FIX IT STICKS Maintenance Compact All-in-One Torque Driver Kit, FISMUTK

FIX IT STICKS Maintenance Compact All-in-One Torque Driver Kit, FISMUTK
All-in-One Torque Driver (15 - 65in lbs) T-Way T-Handle Wrench 15 different bits 1/2" Socket and 1/4" bit adapter set Zippered case with Molded Holder Kit includes: All-in-One Torque Driver (15 - 65 inch lbs); T-Way T-Handle Wrench; 15 different bits: T10, T15, T20, T25, [hex 3/32, 5/64, 1/8, 5/32, 3/16, 2.5mm, 3mm, 4mm, 5mm], P1, slotted #5; 1/2" Socket and 1/4" bit adapter set; Zippered case with Molded Holder. Please note that the All-in-One Driver operates differently than our Torque Limiters. All-in-one Torque Driver Instructions Before use, confirm tool is at the "0" setting. The tool is factory calibrated and requires no adjustment before use. Do not attempt to adjust the collar - it is fixed in position by design.

Insert the All-in-one Torque Driver into any 1/4 drive handle. Insert the appropriate bit for the fastener to be used. Turning the drive handle clockwise, carefully tighten the fastener until the target torque mark on the collar aligns with the fixed mark on the end of the tool.

Gently release pressure, and the torque driver will return to the "0" setting.
FIX IT STICKS Maintenance Compact All-in-One Torque Driver Kit, FISMUTK